HP VMA Series, Installation And Service Manual

Page: 275 / 300

Boot-params Context Level
HP-AM456-9002A Rev 01 VMA-series Memory Array Installation and Service Guide
275
Boot-params Context Level
Figure D.17 System>Boot-params Context Level
The table below describes the commands available at the Boot-params context
sublevel of the CLI.
set stagger-mem-clear
Enables or disables the staggered VIMM boot-up process. When enabled, the
VIMMs boots up in a staggered sequence upon a system reboot.
Syntax
set stagger-mem-clear {disabled | enabled}
Example
To enable the staggered VIMM boot-up process, at the Boot-params context
prompt, type:
Table D.19 Boot-params Context Commands
Command Description
set stagger-mem-
clear
Enables or disables the staggered VIMM boot-up
process.
show stagger-mem-
clear
Displays the current state of the VIMM boot-up
process.
set stagger-mem-clear enabled