manualshive.com logo in svg

HP VMA Series, Installation And Service Manual

Share
Download
HP VMA Series Installation And Service Manual Download Page 258

Appendix D - CLI Reference

258

VMA-series Memory Array Installation and Service Guide

HP-AM456-9002A Rev 01

cancel reboot

Cancels a currently scheduled reboot.

Syntax

cancel reboot

clear log

Clears the system log.

save config

Commits the admin login password and system 
log service changes to the flash or reverts back 
to the factory default settings. If the changes 
are not committed before the system is 
rebooted, then the changes are lost and the 
previous settings are used.

set admin

Changes the password for the admin login.

set boot-params

Sets the systems boot parameters.

set clock

Sets the date/time in ISO-8601 format: 

yyyy-

mm-ddThh:mm:ss

.

set clock-source

Sets the clock source for the system.

save config

Saves system changes to the flash.

restore config

Reverts back to factory settings.

set led-test

Initiates a functional test of the system’s LEDs.

set name

Sets the name of the Memory Array.

show boot-params

Displays the systems boot parameters.

show clock

Displays the system date and time.

show clock-source

Displays the current clock source for the 
system.

show log

Displays the log buffer.

show messages

Displays the 

/var/log/messages

 file.

show name

Displays the name of the Memory Array.

show reboot

Displays when the scheduled reboot will take 
place.

show status

Displays the status of various software 
modules.

Table D.17  System Context Commands (Continued)

Command

Description

Summary of Contents for VMA Series













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands