Appendix D - CLI Reference
262
VMA-series Memory Array Installation and Service Guide
HP-AM456-9002A Rev 01
Syntax
context version
The system prompt changes to the following:
save log
Saves the system log to a remote host using either TFTP or SCP.
Syntax
save log {
<user>
@scp | tftp}://
<
hostname
>
/system.log
Where:
When using SCP, you will be prompted for the user’s password before the copy
process starts.
set admin
Changes the default password for the admin login that is accessed from the
System context level. The admin password must meet the following
requirements.
•
Have a length between 6-12 alphanumeric characters. If six characters are
used, then you must mix upper/lower case letters with numbers or
punctuation.
•
Be a combination of upper and lower case letters and numbers.
•
Cannot be similar to a previous password.
•
Cannot be a palindrome.
If you specify an unacceptable password, you will get a message that the
password is
too simple
. By increasing the length of the password, you can use all
lower case or all upper case characters. Essentially, the longer the password,
the less complicated it needs to be.
system version>
user
@scp
Specifies to use SCP and the user name to log onto the
host when using SCP.
tftp
Specifies to use TFTP.
hostname
Specifies the host name to copy the system log to.
Summary of Contents for VMA Series
Page 4: ...4 VMA series Memory Array Installation and Service Guide HP AM456 9002A Rev 01 ...
Page 22: ......
Page 38: ......
Page 116: ......
