HP VMA Series, Read This First Manual

Page: 5 / 9

2. Using the built-in captive screws, torque to 4.7 in-lb (standard for an M3 screw, as shown in
Table 1 ).
Table 1 Torque specifications
MAXIMUM & MINIMUM TORQUE SPECIFICATIONS FOR ENGLISH AND METRIC SCREWS
Maximum Torque Minimum Torque Metric Thread English Thread
N-m in-lb N-m in-lb Major Dia. Size Major Dia. Size
0.25 2.2 0.17 1.5 0.079” M 2 .086” 2-56
0.53 4.7 0.37 3.3 0.118” M 3 .112” 4-40
0.98 8.7 0.69 6.1 0.138” M 3.5 .138” 6-32
2.01 17.8 1.51 13 0.157” M 4 .164 8-32
4.40 34.0 3.60 27.0 0.197” M 5 .190” 10-32
7.35 65 6.22 55.0 0.236” M 6 .250” 1/4-20
Installing the cable management bracket to the rails
1. To attach the rails-side cable management bracket (A0R63-0002A) to the right side of the rails,
use the four (4-40) screws.
2. Use the Phillips head screw driver to torque to 4.7 in-lb (see Table 1 ).
Note the right side is facing the rear of the chassis.
Installing the cable management bracket to the rails 5