13
3.
Pull the Main Tray Assembly straight out and place on a flat surface. This
assembly is heavy. Move it slowly and be sure it is properly supported.
CAUTION: The CPU Modules are HOT and may cause burns.
Allow the Main Tray sufficient time to cool before
removing it. You should also allow sufficient time for
the CPU Modules to cool before removing memory
DIMMs.
4.
Unpack the new J2240 Main Tray Assembly and set it next to the old J282
Main Tray Assembly. The next steps describe how to remove the memory
DIMMs from the J282 Main Tray and install them in the J2240 Main Tray.
