HP VECTRA XW, Installation Manual, Page: 6 / 36

Installing Windows NT 3.51 WS
4
2. Installing the HP Drivers
Windows NT must be fully installed and running on your HP Vectra
before you can install the HP drivers. The drivers are located on the
HP
Vectra XU/XW Drivers and Documentation CD-ROM supplied with
your HP Vectra Personal Workstation. (This CD-ROM is referred to as
the
HP Drivers CD-ROM in the following instructions.)
NOTE The instructions below assume that drive letter
D:
is assigned to your
CD-ROM drive.
Installing IDE Mass Storage (CD-ROM) Drivers
1 Double-click the Windows NT Setup icon.
2 In the Options menu, choose Add/Remove SCSI Adapters .
3 Select IDE CD-ROM (ATAPI 1.2)/Dual Channel PCI IDE , click Remove , then
click OK to confirm that you want to remove the adapter.
4 Click Add and then click OK .
5 Scroll down the list of adapters and select Other .
6 Insert the HP Drivers CD-ROM; type
D:\IDE\WINNT35
and then
click OK .
7 When the next dialog box displays CMD 64xx 32-bit IDE Adapter , click
OK , then click Install .
8 Click Continue to confirm the path for the files.
9 Close the SCSI Adapter Setup dialog box, then close the Windows NT
Setup window.
10 After the installation, shutdown Windows NT and then restart the
computer.
Enabling Networking after Installation
1 In the Control Panel, choose the Network icon.
2 Click Yes when the Install Network Now message appears.