HP Vectra XA 6/xxx MT PC Series
5-6 HP Vectra XA 6/xxx MT PC Series
Mini-Tower Vectras
5
Main Memory
The PC has three banks on the system board for installing main memory; banks
A, B and C. Each bank consists of two sockets. The PC is supplied with 16 or
32 MB of main memory (composed of two memory modules installed in any
bank). The PC uses 60-ns EDO DRAM.
Memory modules must be installed in identical pairs
, so that each bank with
memory installed contains two memory modules of the same size and type
(both EDO, or both FPM).
Main memory can be installed up to a maximum of 192 MB.
Video Memory
The PC is supplied with 2 MB of video memory. An additional 2 MB of video
memory can be installed by adding a D3557B module in the video memory
socket. This will make a total of 4 MB. Alternatively, an additional 6 MB of video
memory can be installed by adding an MGA-MIL/MOD6 module in the video
memory socket (ordered from Matrox); this will make a total of 8 MB.
Replacing the Processor Chip
Matrox Video Board Switches
Switch
Function
1
·
OFF to prevent Video BIOS upgrades - DEFAULT
·
ON to allow Video BIOS upgrades
2
·
OFF for single-screen operation - DEFAULT
·
ON for dual-screen operation (with second VGA controller)
If any thermal interface material, such as aluminium
foil or silicone, is supplied with the heat-sink or the
processor chip, place it carefully on the top of the
processor before installing the heat-sink.
psh-v1.bk : 6xa1mt.fb4 Page 6 Tuesday, March 11, 1997 1:16 PM
