HP Vectra VT6, Supplementary Manual

Page: 12 / 56

8
1 Product Overview and Features
Product Features
Fast-20 SCSI-2 Interface
On the
HP Vectra XU 6/xxx PC
, data transfer rates of up to 20 MB per
second are available, using the 8-bit SCSI bus. Up to seven SCSI devices can
be connected on a variety of internal and external connectors. SCSI
configured automatically (SCAM) support is provided for SCSI Plug and Play.
HP drivers are provided for the following operating systems:
❒
OS/2 2.11 (required)
❒
Windows NT (required)
❒
Windows 3.11 (recommended)
❒
Windows 95 (recommended)
❒
OS/2 Warp Connect (recommended).
IDE Controller
The integrated IDE controller supports Enhanced IDE and Standard IDE. It
offers data transfer rates of up to 16.7 MB per second. The controller
supports up to four IDE devices: two IDE devices can be connected to the
primary channel cable, and two to the secondary channel cable. It is possible
to connect both fast devices and slow devices on the same channel without
affecting the performance of the fast device.
Supported Drives
The following hard disk drives are supported (the first two are only
applicable to the
HP Vectra XU 6/xxx PC
):
❒
3.5-inch, 1 GB Fast-20 SCSI-2 hard disk drive (D2920A)
❒
3.5-inch, 2 GB Fast-20 SCSI-2 hard disk drive (D2926A)
❒
3.5-inch, 1 GB IDE hard disk drive (D2919A).
1.
Your display might not support the maximum refresh rates that are shown here. Refer to the User’s Guide supplied with the display for
details of the refresh rates which it supports.
Resolution 256 Colors
8 Bits Per Pixel
64 K Colors (Hi-Color)
16 Bits Per Pixel
16.7 M Colors (True-
Color) 24 Bits Per Pixel
16.7 M Colors (True-
Color) 32 Bits Per Pixel
Maximum
Refresh Rates
1
640
✕
480 2 MB 120 Hz
800
✕
600 2 MB 120 Hz
1024
✕
768 2 MB 4 MB 120 Hz
1152
✕
882 2 MB 4 MB 120 Hz
1280
✕
1024 2 MB 4 MB 8 MB 90 Hz
1600
✕
1200 2 MB 4 MB 8 MB 72 Hz