10
Installing Accessories in the New Desktop Package
Replacing the Pentium II
Processor
The Pentium II processor is contained on a module that is installed in a socket
on the system board. It is held in place by a bracket. There are two plastic
clips, one on the top of each pillar of the bracket, to hold the processor
module in place.
To remove the old processor module:
1
Press the two plastic clips towards each other.
2
Carefully pull the processor module away from its connector on the
system board.
The heat-sink is supplied with the processor, and is bolted to it by the
manufacturer.
Plastic clips
Heat-sink
Bracket pillars
1book.bk : 1ch01.fb4 Page 10 Monday, May 26, 1997 6:17 PM
