Tool Description
Tool Size (if
applicable)
Description #1 Screw driver of "+" type
Description #2 Hexagonal nut screw driver for DVI and D-SUB connector
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Lay the monitor on a flat, soft and clean surface.
2. Remove the Stand and Base ASSY.
3. Remove the screws.
4. Remove the rear cover.
5. Remove the screws and deco bezel
6. Remove the Pins and tape
7. Remove the Mainframe and panel
8. Remove the the screws and the pin.
9. Remove the boards..
10. Remove the mainboard connect pin
11.
12.
13.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
