© Copyright 2011 Hewlett-Packard Company, L.P.
The information contained herein is subject to change without notice.
Printed in China
February 2011
5998-1309
*5998-1309*
Page 1: ...e Safety Precautions on page 3 3 Power on and verify selftest by connecting the power cord Note The switch does not contain a power switch It is turned on by connecting the power cord Port LEDs After selftest PowerLED On Fault LED Off 4 Install the switch To attach the mounting brackets to the switch use a 1 Phillips cross head screwdriver and the included 8 mm M4 screws To mount the switch to a w...
Page 2: ...ddress http 192 168 2 10 to access the switch s Web interface 4 Click Log on to log onto the switch there is no default password 5 Click Network Setup Get Connected and configure IP network settings on the switch for operation on your network Note If you enable DHCP for automatic IP network configuration the switch must be connected to the same network as the DHCP server After automatic IP configu...
Page 3: ...the regulations for power cords in your country region The mark is your assurance that the power cord can be used safely with the switch and power supply When installing the switch the AC outlet should be near the switch and should be easily accessible in case the switch must be powered off Ensure the switch does not overload the power circuits wiring and over current protection To determine the p...
Page 4: ... Copyright 2011 Hewlett Packard Company L P The information contained herein is subject to change without notice Printed in China February 2011 5998 1309 5998 1309 ...
