manualshive.com logo in svg

HP Tx1205us - Pavilion - Turion 64 X2 1.8 GHz, Maintenance And Service Manual, Page: 43 / 131

Share
Download
HP Tx1205us - Pavilion - Turion 64 X2 1.8 GHz Maintenance And Service Manual Download Page 43

Hard drive

Description

Spare part number

5400-rpm, 160-GB

441128-001

5400-rpm, 120-GB

441127-001

5400-rpm, 80-GB

441126-001

5400-rpm, 60-GB

441125-001

Before removing the hard drive, follow these steps:

1

.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2

.

Disconnect all external devices connected to the computer.

3

.

Disconnect the power cord.

4

.

Remove the battery (see 

Battery on page 36

).

Remove the hard drive:

1

.

Position the computer with the front toward you.

2

.

Loosen the two Phillips PM2.0×5.0 screws 

(1)

 that secure the hard drive cover to the computer.

3

.

Lift the left side of the hard drive cover 

(2)

 and swing it to right.

4

.

Remove the hard drive cover.

NOTE:

The hard drive cover is included in the Plastics Kit, spare part number 441138-001.

5

.

Grasp the Mylar tab 

(1)

 on the hard drive and lift the hard drive to disconnect it from the system

board.

38 Chapter 

5

   Removal and replacement procedures

ENWW

Summary of Contents for Tx1205us - Pavilion - Turion 64 X2 1.8 GHz




































































































































Reviews:

No comments