Display Cable
Description
Spare part number
Display cable (LVDS)
671598-001
The display cable is located near the top of the system board. You can select from two different
methods to remove the display cable:
●
Detach the middle frame screws, lift the middle frame, and reach under to disconnect the cable.
For more information about removing the middle frame, see
Front Bezel and Display Panel
on page 85
.
●
Remove the system board to disconnect the display cable from the display panel (shown in the
following procedure).
Figure 7-50
Display cable location
To remove the display cable:
1.
Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 40
).
2.
Remove the rear cover (see
Rear Cover on page 41
).
3.
Remove the optical drive (see
Optical Drive on page 47
).
4.
Remove the system board cover (see
System Board Cover on page 60
).
5.
Remove the heat sinks (see
Heat sinks (Thermal Modules) on page 66
).
6.
Remove the coaxal cable connector (see
Coaxal Cable Connector on page 78
).
7.
Remove the system board (see
System Board on page 80
).
8.
Press the latches on each side of the cable connector
(1)
to disengage the cable from the
connector.
Display Cable
83
