manualshive.com logo in svg

HP TFT5110R, User Manual

Share
Download
HP TFT5110R User Manual Download Page 44

Regulatory Compliance Notices 

HP TFT5110R User Guide 

A-3

 

  

COMPAQ CONFIDENTIAL

 

Writer: Amy L. Laffitte File Name: f-appa Regulatory Compliance Notices 

Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 9:55 AM 

Modifications 

The FCC requires the user to be notified that any changes or modifications made to 
this device that are not expressly approved by HP Company may void the user's 
authority to operate the equipment. 

Cables 

Connections to this device must be made with shielded cables with metallic RFI/EMI 
connector hoods in order to maintain compliance with FCC Rules and Regulations. 

 

Declaration of Conformity for Products Marked with the FCC Logo, 
United States Only 

This device complies with Part 15 of the FCC Rules.  Operation is subject to the 
following  two conditions:  (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may 
cause undesired operation. 

For questions regarding your product, contact: 

• 

HP Company 

P. O. Box 692000, Mail Stop 530113 

Houston, Texas  77269-2000 

Or, call 1-800-652-6672  

For questions regarding this FCC declaration, contact: 

• 

HP Company 

P. O. Box 692000, Mail Stop  510101 

Houston,  Texas  77269-2000 

Or, call (281) 514-3333 

Summary of Contents for TFT5110R
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands