HP T5700 - compaq thin client, Instructions Manual, Page: 3 / 11

Using Rapport Administrative Software and Altiris Deployment Solution on the Same HP Compaq Thin Client Network
3
Recommended
Practices The following represents a method for ensuring maximum functionality of both
management solutions co-existing on the same network. When the Rapport server has
been configured to use PXE, the Altiris Deployment Solution PXE services should not be
installed. The Altiris BootWorks partition should supersede PXE on clients managed by
the Altiris server.
Rapport Setup
The Rapport Server must be configured to use PXE. Rapport 3.02 is automatically
configured to use PXE. No options exist for deselecting PXE during installation or for
disabling during operation.
Altiris Setup
If the Altiris Deployment Solution is already installed, the PXE service must be disabled.
The following sections provide steps for both Microsoft Windows 2000 and 2003
Server families and Microsoft Windows NT 4.0 Server.
To disable PXE service for Microsoft Windows 2000 and 2003 Server families, perform
the following steps:
1. Right-click My Computer and select Manage .
2. Click on Services in the left pane of the Window.
3. Scroll in the right pane and select Altiris PXE Config Service .
4. When the Altiris PXE Config Service window opens, change the Startup Type to
Disabled .