HP Surestore 64 - Director Switch, User Manual

Page: 261 / 296

$SSHQGL[
245
Appen
d
ix
'
Connection to HP EFC server
lost. Click
2.
to exit
application.
The HP EFC Manager lost the network connection to the HP
EFC Server. Restart the HP EFC Manager to connect to the HP
EFC Server.
Continuing may overwrite host
programming. Continue? Configurations sent from the host may be overwritten by HP
EFCM. Continuing will activate the current configuration, which
may have been configured by an S/390 host.
Could not export log to file. A file I/O error occurred. The log file could not be saved to the
specified destination. Ensure filename and drive are correct.
Could not find firmware file. The selected file is not a firmware file. Obtain a valid firmware
file from your service representative.
Could not remove dump files
from the HP EFC server. Dump files could not be removed from server. Link may be down
or director may be busy. Retry the operation later. If the
condition persists, contact support personnel.
Could not stop port diagnostics. Port diagnostics could not be stopped. Link may be down or
director may be busy. Retry the operation later. If the condition
persists, contact support personnel.
Could not write firmware to flash
memory. Firmware could not be written to flash memory. Try again. If
problem persists, contact support personnel.
CUP name and port name are
identical. Within the address configuration, one or more of the port names
are the same as the CUP name. Make sure all names are
unique for the ports and CUP name.
Message Cause/Solution
Date entered is invalid. Date entered incorrectly. Verify that the number of days in the
month is valid.
Device applications should be
terminated before starting
diagnostics. Press NEXT to
continue. . Device application is not terminated. Terminate device
application before running port diagnostics
Message Cause/Solution