Installing an adapter 10
For more information, see "Cable specifications (on page
14
)".
Connecting the copper cable
1.
Insert the transceiver into the cage. Be sure that the tab on the plug clicks into position.
2.
Connect one end of the copper cable to the CNA.
3.
Connect the other end of the cable to the converged network switch.
For more information, see "Cable specifications (on page
14
)".
Powering up the CNA
1.
Verify that the CNA is securely installed in the server and that the correct media is attached.
2.
Plug in and power up the server.
3.
Observe the link and activity LEDs to be sure the CNA connects to the switch.
