HP StoreEasy 3000 Administrator'S Manual Download

Page: 13 / 102

Definition

Status

LED

Item

Removing the drive does not cause a logical drive to fail.

Off

The drive is a member of one or more logical drives.

Solid green

Drive status

The drive is rebuilding or performing a RAID migration,
stripe size migration, capacity expansion, or logical drive
extension, or is erasing.

Flashing green

The drive is a member of one or more logical drives and
predicts the drive will fail.

Flashing amber/green

The drive is not configured and predicts the drive will fail.

Flashing amber

The drive has failed.

Solid amber

The drive is not configured by a RAID controller.

Off

Systems Insight Display LED combinations

When the health LED on the front panel illuminates either amber or red, the server is experiencing
a health event. Combinations of illuminated Systems Insight Display LEDs, the system power LED,
and the health LED indicate system status.

Table 1 Systems Insight Display LEDs and internal health LED combinations

Status

System power LED

Health LED

Systems Insight
Display LED and
color

One or more of the following conditions may exist:

Amber

Red

Processor (amber)

•

Processor in socket X has failed.

•

Processor X is not installed in the socket.

•

Processor X is unsupported.

•

ROM detects a failed processor during POST.

Processor in socket X is in a pre-failure condition.

Green

Amber

One or more DIMMs have failed.

Green

Red

DIMM (amber)

DIMM in slot X is in a pre-failure condition.

Green

Amber

The Health Driver has detected a cautionary temperature
level.

Green

Amber

Over temp (amber)

The server has detected a hardware critical temperature
level.

Amber

Red

The PCI riser cage is not seated properly.

Green

Red

PCI riser (amber)

One fan has failed or is removed.

Green

Amber

Fan (amber)

Two or more fans have failed or are removed.

Green

Red

One or more of the following conditions may exist:

Amber

Red

Power supply
(amber)

•

Only one power supply is installed and that power
supply is in standby.

•

Power supply fault

•

System board fault

One or more of the following conditions may exist:

Green

Amber

•

Redundant power supply is installed and only one
power supply is functional.

•

AC power cord is not plugged into redundant power
supply.

Hardware components

Summary of Contents for StoreEasy 3000







































































































Search results

Summary of Contents for StoreEasy 3000

Reviews:

Related manuals for StoreEasy 3000

Brands by name

Popular brands

HP StoreEasy 3000, Administrator'S Manual

Search results

Summary of Contents for StoreEasy 3000

Reviews:

Related manuals for StoreEasy 3000

Brands by name

Popular brands