HP StorageWorks Q2300, Installation Manual

Page: 10 / 42

Q2300 HBA features 10
Performance specifications
The Q2300 HBA is a 2-Gb, high-performance Direct Memory Access (DMA) bus master host
adapter designed for high-end systems.
This HBA has the following features:
• Unique, single-integrated Fibre Channel controller for added reliability and optimum
performance.
• Autonegotiation of Fibre Channel speed bit rate (1 Gbps or 2 Gbps).
• Combines a powerful Reduced Instruction Set Computing (RISC) processor, a Fibre Channel
protocol manager (FPM) with 2-Gb Fibre Channel transceivers, and a peripheral component
interconnect (PCI) or peripheral component interconnect-extended (PCI-X) local bus interface in
a single-chip solution.
• Supports Private Loop Direct Attach (PLDA) and Fabric Loop Attach (FLA) connections.
• Supports bus master DMA.
• Supports Fibre Channel protocol-SCSI (FCP-SCSI), IP, and Fibre Channel-Virtual Interface (FC-VI)
protocols.
• Supports point-to-point fabric connection (F-PORT FABRIC LOGIN).
• Complies with:
• PCI Local Bus Specification revision 2.2.
• PCI-X Addendum (revision 1.0) to the PCI Local Bus Specification.
• Third-generation Fibre Channel–Physical and Signaling Interface (FC-PH-3) standard.
• Fibre Channel-Arbitrated Loop (FC-AL-2) standard.
• U.S. and international safety and emissions standards.
Environmental specifications
Table 2 lists the HBA environmental specifications.
Table 2 HBA environmental specifications
Environment Minimum Maximum
Operating temperature 0 ° C/32 ° F 55 ° C/131 ° F
Storage temperature –2 ° C/-4 ° F 70 ° C/158 ° F
Relative humidity (non-condensing) 10% 90%
Storage humidity (non-condensing) 5% 95%