Before You Begin
27
NAS b2000 v2 Quick Start Guide
Table 3:
Configuration Information
Part A: To be completed for DHCP and non-DHCP configurations
Server Host Name:
Integrated Lights-Out Name:
Integrated
Lights-Out
Default User:
Integrated Lights-Out Password:
Note: If NIC teaming is to be implemented, determine which ports will be teamed.
Configure these Ethernet ports for DHCP protocol. For more information, refer to the
Ethernet teaming features and procedures section of administrative procedures in the
administration guide.
Part B: To be completed for non-DHCP configurations only
DNS Servers
IP Address
1
2
3
NAS NIC Port*
IP Address
Subnet Mask
Gateway
Address
Eth 0
Eth 1
Integrated Lights-Out Eth port
* The default NAS b2000 v2 has two Ethernet ports available for network
connectivity. Disable ports that will not be used. Each Ethernet port must be
configured with a separate subnet.
Part C: SNMP Information (optional)
Trap Destination (IP Address)
Manager Client:
Management Traps Community
String:
System Management
Community String:
Plankton_book.book Page 27 Monday, February 3, 2003 4:06 PM
