HP StorageWorks MSL2024, User'S And Service Manual, Page: 110 / 276

numbered 1-12 or 1-11, and slots in the right magazine are numbered 12-23 or 13-24. Each slot
is represented by a character, as shown in
Table 25 .
Table 25 Display indication definitions
Definition Character displayed
Slot has a tape X
Slot is empty -
Mailslot is enabled but does not have a tape m
Mailslot has a tape M
Slot has a cleaning tape C
Media needs attention, often as a result of a damaged or incompatible cartridge !
NOTE:
If the mailslot is enabled, the storage slot count is reduced.
To view more details about the contents of each slot, press Enter when the screen displays either Left
Magazine or Right Magazine .
To view the tape inventory:
1. From the Home screen, press Previous or Next until the screen displays Status/Information . Press
Enter to select.
2. Press Previous or Next until the screen displays Inventory . Press Enter to select.
3. By using Previous or Next , you can select from the following inventory locations:
• Mailslot
• Left magazine
• Right magazine
• Drive 1
• Drive 2 (if two drives are present)
4. To view the inventory of a magazine, press Enter when the OCP displays Left or Right Magazine .
The OCP will display the contents of the lowest numbered slot in the magazine. The display will
show the tape bar code number,
Full , or Empty .
5. Use Previous or Next to scroll through the remaining slots in the magazine. Press Cancel to choose
another inventory location.
6. To view the inventory of a tape drive, press Previous or Next until the screen displays Drive 1 ,
or Drive 2 . The display will show the tape bar code number, Full , or Empty . Press Enter to view
the source of the tape loaded in the drive. For example, Drive 1 Tape Source = Slot 2 , indicates
that the tape in Drive 1 was loaded from slot 2.
Library information (Status/Information > Library Information)
To obtain information about your device:
Operating the Tape Library 110