manualshive.com logo in svg

HP StorageWorks Modular Smart Array 500 System, Maintenance And Service Manual, Page: 43 / 46

Share
Download
HP StorageWorks Modular Smart Array 500 System Maintenance And Service Manual Download Page 43

Specifications 

HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide 

5-3

 

  

 

HP CONFIDENTIAL

 Codename: Aurora Part Number: 251850-004 Last Saved On: 9/19/03 11:04 AM 

 

Hot-Plug AC Power Supply 

 

Table 5-4:  Hot-Plug Power Supply Specifications 

Specification Value 

Height 

12.7 cm (4.5 in) 

Width 

15.9 cm (6.25 in)  

Depth 

24.1 cm (9.5 in)  

Weight 

2.9 kg (6.4 lb)  

Note:

  The MSA500 system power supply specifications are calculated 

without the blower. 

Hot-Plug DC Power Supply 

 

Table 5-5:  Hot-Plug DC Power Supply Specifications 

Specification Value 

Voltage  

Nominal input voltage 

-48 or 48 VDC 

Maximum input voltage 

75 VDC 

Operating voltage range 

36 to 72 VDC 

Ripple/Noise 

100 mV PARD* 

Overshoot 

Must remain within regulation limits during startup or shutdown 

Current  

Max steady state input current 

13.2 A 

In-rush current 

70 A 

Input over-current 

Customer must provide fusing for facility DC feeds that protect the 
system from catastrophic over-current within 20 uS. Fuse should 
sustain all in-rush and operating currents. 

Max input current slew rate 

1A/uS 

Max rated power 

 

 

499 W 

*Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at the load on 
any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency band. 

 

 

Summary of Contents for StorageWorks Modular Smart Array 500 System















































Reviews:

No comments