Serial/Telnet User Interface
117
Network Storage Router M2402 User Guide
— Modify Trap Manager IP Addresses and Filters (4) sets up IP
addresses for Trap Managers.
If Traps are enabled, this sub-menu is displayed and is used to change one
of three Manager IP Addresses for Traps. The Trap Manager IP address is
the address used for sending Trap notifications. Typically, this is the IP
address of the machine using the network management application or a
MIB browser.
Event logging captures the last 215 events and then starts overwriting the
log.
The Trap IP Address Configuration Menu displays the current settings for
the three Trap Managers.
To make changes to any of the Trap Managers, select the appropriate
Change Trap Manager Settings option (0), (1), (2), or (3).
Note:
Be sure to correctly set the clock and date in the Real Time Clock Configuration
menu so that event logging is accurate.
■
Change Security Settings (9) changes security settings, including the user
name and password.
The default user name is
root
and the default password is
password
.
Caution:
To ensure security, change the user name and password from the
default settings.
Note:
The security settings entered here affect all user interfaces.
User names and passwords should be unique and kept confidential. HP
recommends using a combination of letters and numbers when creating user
names and passwords.
Summary of Contents for StorageWorks M2402
