Chapter 3. Configuration
You can configure the private LAN connection (LAN 2) using one of the following methods:
•
Use Dynamic Host Control Protocol (DHCP) to assign the HAFM server IP address,
subnet mask, and default gateway IP address. You can either auto-detect or manually
select the DNS server IP address.
•
Manually enter the HAFM server IP address, subnet mask, default gateway IP address, and
DNS server IP address.
Manually Configuring Private LAN Addresses Using DHCP
To configure TCP/IP network information for the private LAN connection (LAN 2):
1.
At the LCD panel, press ENTER. The Welcome!! or operational information message
changes to the following (
):
Figure 3.15. LCD Panel (Password Entry)
2.
Using the
button to increment a digit, the
button to decrement a digit, the
button
to move the cursor left, and the
button to move the cursor right, input the default
password (
9999
), then press ENTER. The
LAN 1 Setting??
message displays
at the LCD panel.
3.
Press the
button until the LAN 2 Setting?? message displays at the LCD panel.
4.
Press ENTER and the following message displays (
) to allow the selection of
DHCP.
Figure 3.16. LCD Panel (DHCP selection)
5.
Use the arrow keys as described in step 2 and select YES to use DHCP, then press
ENTER. The following message displays (
):
Figure 3.17. LCD Panel (Auto Get DNS)
hp StorageWorks HA-Fabric Manager Appliance Installation
Guide
41
