4–2
ESL9000 Series Tape Library Unpacking and Relocating Guide
Unpacking and Moving the Library
Receiving the Library
To receive the library:
WARNING: A library can weigh up to 1822 pounds (826 kg). At least two people
should move and install the library. Failure to use two people could result in
personal injury and/or equipment damage.
1. Unpack the library as close to the installation site as possible.
2. Inspect the shipping pallet and shipping container for damage that may have
occurred during shipment. Report any damage to the shipper.
Removing the Library Shipping Container
To remove the library shipping container:
1. Choose the unloading side. The library can be unloaded from either the right or
the left side of the pallet.
2. Verify the minimum floor space requirements.
•
Removing the ESL9198 library shipping container requires a minimum of 3
feet (92 cm) on all sides. For the side being used for the ramp, an additional 5
feet (1.53 m) is required for a total of 8 feet (2.44 m). (When crated, the
library occupies a footprint of 48 x 48 inches (122 cm x 122 cm) and is 80
inches (203 cm) tall.)
•
Removing the ESL9322 library shipping container requires a minimum of 3
feet (92 cm) on all sides. For the side being used for the ramp, an additional 6
feet (1.83 m) is required for a total of 9 feet (2.74 m). (When crated, the
library occupies a footprint of 48 x 52 inches (122 cm x 133 cm) and is 80
inches (203 cm) tall.)
•
Removing the ESL9326/ESL9595 library shipping container requires a
minimum of 3 feet (92 cm) on all sides. For the side being used for the ramp,
an additional 7 feet (2.14 m) is required for a total of 10 feet (3.05 m). (When
crated, the ESL9326 library occupies a footprint of 48 x 68 inches (122 cm x
173 cm) and is 80 inches (203 cm) tall. When crated, the ESL9595 library
occupies a footprint of 48 x 71 inches (122 cm x 181 cm) and is 80 inches
(203 cm) tall.)