4 Con
fi
guring the IP address
1.
Make sure the library is powered up. If not:
a.
Press the power button located behind the laptop tray on the front of the
library (see
.
b.
After several minutes, verify that the current state of the library appears in
the System State display on the front panel (“System On-line” or “System
Off-Line”).
1
2
3
4
1
Power button
2
Front door latch
3
Laptop tray
4
Laptop tray latch
Figure 44 Powering up the library
2.
Take the library off-line, if it is not off-line already.
a.
Press the Ops button on the OCP to access the Operations screen.
b.
Select Cabinet.
c.
Use the Up and Down arrows to take the library off-line.
HP StorageWorks ESL E-Series Tape Library unpacking and installation guide
73
Summary of Contents for StorageWorks ESL E Series
Page 8: ...8 ...
Page 72: ...72 Loading tape cartridges ...
