1
2
3
1
Shipping restraints in storage position
2
Spare screws
3
Shipping restraints
Figure 18 Storing the vertical axis and robot shipping restraints
11.
Store the
fi
ve spare screws in the robot shipping restraint as shown in
12.
Use the remaining two screws to secure the combined shipping restraints in the
library, as shown in
.
13.
From the back of the library use a ratchet with a 7/16-inch socket or a 7/16-inch
open-end wrench to remove the two nuts securing the counterweight shipping
restraint to the back wall of the library cabinet (see
).
NOTE:
HP recommends that you use a 12-inch socket extension.
34
Unpacking the library
Summary of Contents for StorageWorks ESL E Series
Page 8: ...8 ...
Page 72: ...72 Loading tape cartridges ...
