HP StorageWorks Edge Switch 2/12, Service Manual

Page: 91 / 176

Repair Information
91 Edge Switch 2/12 Service Manual
Using Log Information
The EWS interface provides maintenance personnel with access to event log
information for the Edge Switch 2/12.
To open the EWS event log, click the Log tab at the Monitor panel. The Monitor
panel opens with the Log page displayed (
Figure 16 ).
The log information is displayed using the following columns:
■
Date/Time - Date and time the event occurred.
■
Error Event Code - Three-digit code that describes the event. Event codes
are listed and described in “
Event Codes ” on page 133.
■
Severity - Severity of the event (Informational, Minor, Major, or Severe).
■
Event Data - Up to 32 bytes of supplementary information (if available) in
hexadecimal format. Event data is described in “
Event Codes ” on page 133.
You can manage log contents using the following buttons:
■
Clear Event Log Entries - Click this button to delete all entries in the Event
log.
■
Clear System Error Light - Click the button to extinguish the System Error
LED on the switch.
Figure 16: Monitor panel (Log page)