HP StorageWorks 2/140 - Director Switch, Service Manual

Page: 175 / 396

Repair Information
175 Director 2/140 Service Manual
— Flows rerouted to and from ISLs.
Viewing Port Properties
To open the Port Properties dialog box, perform the following:
1. Double-click a port graphic at the Hardware View or a port row at the Port
List View. The Port Properties dialog box displays, as shown in Figure 42 .
Figure 42: Port Properties dialog box
The Port Properties dialog box provides the following information:
Note: If the Open Trunking feature is installed, an additional item, Congested
Threshold %, displays in the Port Properties dialog box.
■
Port Number—The director port number (0-127 and 132-143 inclusive).
■
Port Name—The user-defined name or description for the port.
■
Type—The Port type (G_Port, F_Port, or E_Port) type of port (G_Port if
nothing is attached to the port, F_Port if a device is attached to the port, and
E_Port if the port is connected to another director or switch as part of an ISL).
■
Operating Speed—The operating speed of the port (Not Established,
1 Gbps, or 2 Gbps.).
■
Port WWN—The Fibre Channel WWN for the director port.