Diagnostics
128
26
An SBAR assembly failed and must be removed and replaced (“
■
This procedure is concurrent and can be performed while director power is on.
■
Perform the data collection procedure as part of FRU removal and
replacement.
Did SBAR assembly replacement solve the problem?
NO
YES
↓
The director is operational. Exit MAP.
Contact the next level of support. Exit MAP.
27
Inspect and service the host bus adapters (HBAs), as necessary.
Did service of the HBAs solve the problem?
NO
YES
↓
Exit MAP.
Contact the next level of support. Exit MAP.
28
A port connection is not allowed because of an Exchange Security Attribute
(ESA) feature mismatch. Switch binding parameters must be compatible for both
fabric elements.
1. At the Hardware View, choose Configure > Switch Binding > Change
State. The Switch Binding - State Change dialog box displays, as shown in
.
, as
Figure 30: Switch Binding - State Change dialog box
Summary of Contents for StorageWorks 2/140 - Director Switch
