Interconnect
Table 2. SAN Fibre Channel infrastructure
Features
HP StorageWorks SAN Switch 2/8
HP StorageWorks SAN Switch 2/16
Number of ports
8
16
Per port line speed
1.0625/2.125 Gb/s, Full Duplex
1.0625/2.125 Gb/s, Full Duplex
Note 1: An external FC switch must be used. The MSA Fabric Switch 6 is not supported.
Note 2: Shaded areas represent hardware used in example technical blueprint configuration.
Storage
Table. 3. Disk storage
Features
MSA1500 w/160-GB drives plus two
MSA20 Serial ATA disk enclosures
MSA1500 w/250-GB drives plus two
MSA20 Serial ATA disk enclosures
Number of SATA disk drives
12
12
Maximum number of SATA disk drives
96
96
Total raw capacity
15.0 TB
23.4 TB
Note 1: Shaded areas represent hardware used in example technical blueprint configuration.
Note 2: One MSA1500 can support a total of eight single-bus MSA20 Serial ATA disk enclosures or four MSA30 single-
channel SCSI disk enclosures
Table 4. Tape storage
Features
HP StorageWorks MSL5026s2
tape library
HP StorageWorks MSL5030
tape library
Drive type
SDLT
LTO Ultrium
Number of drives
1
2
1 2
Number of slots
26
30
Maximum native storage capacity
4.2 TB
3.6 TB
Maximum native data transfer rate
16 MB/s
57.6 GB/hr
32 MB/s
115.2 GB/hr
15 MB/s
54 GB/hr
30 MB/s
108 GB/hr
Note 1: An EBS-supported MSL or ESL model tape library is used.
Note 2: Shaded areas represent hardware used in the example technical blueprint configuration.
9
