Reverse this procedure to reassemble and install the solid-state drive.
Audio jack board cable
Description
Spare part number
Audio jack board cable (includes double-sided adhesive)
941844-001
Before removing the audio jack board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
).
Remove the audio jack board cable:
1.
Release the ZIF connector (1) to which the audio jack board cable is connected, and then disconnect
the audio jack board cable from the system board.
2.
Release the ZIF connector (2) to which the audio jack board cable is connected, and then disconnect
the audio jack board cable from the audio jack board.
3.
Detach the audio jack board cable (3) from the left speaker. (The audio jack board cable is attached to
the left speaker with double-sided adhesive.)
4.
Remove the audio jack board cable.
Reverse this procedure to reassemble and install the audio jack board cable.
34
Chapter 5 Removal and replacement procedures
