NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE:
Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE:
FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration (choose one from each list unless otherwise noted)
HP Chassis
NOTE:
Support for 12 LFF hard drives is available for special large volume
configurations. Please contact your HP representative for details.
HP t2500 12 LFF Configure-to-order Chassis
718404-B21
HP t2500 24 SFF Configure-to-order Chassis
737776-B21
CTO Server
HP ProLiant SL210t Gen8 1U Node Configure-to-order Server
NOTE:
If customer desires a 4 Node configuration, quantity 4 of P/N: 718406-B21
should be ordered.
718406-B21
HP ProLiant SL210t Gen8 2U Node Configure-to-order Server
NOTE:
If customer desires a 2 Node configuration, quantity 2 of P/N: 718407-B21
should be ordered.
718407-B21
HP Power Supplies
NOTE:
Mixing of power supplies in the same server is not supported. All power supplies
must be of the same output and efficiency rating. If non-matched power supplies are
inserted, you will get errors, and operation will fail.
NOTE:
Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor
HP Common Slot Titanium Power Supply Kits
NOTE:
The following Power Supplies offer 96% efficient with support for Intelligent
Power Discovery.
HP 750W Common Slot Titanium Hot Plug Power Supply Kit
697581-B21
HP Common Slot Platinum Plus Power Supply Kits
NOTE:
The following Power Supplies offer 94% Efficiency with support for Intelligent
Power Discovery.
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
656363-B21
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
656364-B21
HP 1500W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE:
The HP 1500W Ht Plg Pwr Supply Kit requires the removal of the back door on a
1000mm depth rack or the use of a 1200mm depth rack.
684532-B21
HP Common Slot 380VDC Power Supplies
NOTE:
94% efficiency.
HP 1200W Common Slot 380VDC Hot Plug Power Supply Kit
684539-B21
HP Common Slot 277VAC Power Supplies
NOTE:
94% efficiency.
QuickSpecs
HP SL2500 Scalable System
Configuration Information - Factory Integrated Models
DA - 14656 North America — Version 6 — December 9, 2013
Page 18
