HP sa1100, Quick Start Manual

Page: 8 / 104

4
Checking the power cord
Check the power cord to ensure that it's the correct type
specifically required in the region where you are installing and/or
using the hosting appliance. Do NOT modify or use the supplied
AC power cord if it's not the correct type. Power cord and
connector requirements include, without limitation, the following:
• Rating: Power cords must be rated for available AC
voltage and have a current rating at least 125 percent of
the current rating of the hosting appliance.
• Connector, wall outlet end: Power cords must be
terminated in a grounding type-male plug designed for use
in your region. For US/Canadian installations, the
connector should be a NEMA 5-15P type attachment plug.
Power cords must have certification marks showing
certification by an agency acceptable in your region.
• Connector, power supply end: The connector that plugs
into the AC receptacle on the hosting-appliance power
supply must be an IEC 320, sheet C13, type-female
connector.
• Power cord length and flexibility: Power cords must be no
more than 4.5 meters (14.76 feet) long, and, for North
America, must be flexible SVT or SJT type cord, 18 AWG
minimum and, outside North America, must be
harmonized <HAR> cord or VDE-certified cordage to
comply with hosting-appliance safety certifications.
Installing the hosting appliance
Follow these steps to rack-mount the hosting appliance:
• Install the rack-mount brackets
• Prepare for rack-mounting the hosting appliance
• Install the hosting appliance in a rack