HP S5820V2 Series Page 14 Command Reference Manual Download

Page: 14 / 28

Field Description

VSI manager ID

Address of the VSI manager.

indicates no VSI manager is specified.

Filter type

VSI filter type:

•

VLAN ID.

•

MAC address/VLAN ID.

Filter info

VSI filters:

•

In the format <VLAN ID>, meaning the VLAN to which the traffic belongs.

•

In the format <MAC address, VLAN ID>, meaning the destination MAC for the

traffic and the VLAN to which the traffic belongs.

display interface s-channel

Use

display

interface s-channel

to display information about an S-channel interface or a VSI.

Syntax

display

interface

[

s-channel

[

interface-number

channel-id

interface-number

channel-id

vsi-local-id

] ]

[

brief

[

description

] ]

Views

Any view

Predefined user roles

network-admin
network-operator

Parameters

interface-number

channel-id

: Specifies an S-channel interface. The

interface-number

argument specifies

the physical port where the S-channel resides. The

channel-id

argument specifies the ID of the S-channel.

interface-number

channel-id

vsi-local-id

: Specifies a VSI. The

interface-number

argument specifies the

physical port where the S-channel resides. The

channel-id

argument specifies the ID of the S-channel. The

vsi-local-id

argument specifies the local ID of the VSI.

brief

: Displays brief information. Without this keyword, the command displays detailed information.

description

: Displays a complete interface description in brief information when you configure an

interface description string longer than 27 characters. If you do not specify this keyword, the command
displays only the first 27 characters in brief information.

Usage guidelines

•

If the

s-channel

keyword is not specified, the command displays information about all interfaces.

•

If the

s-channel

keyword is specified but no S-channel interface or VSI is specified, the command

displays information about all created S-channel interfaces and VSIs.

Examples

# Display detailed information about S-channel interface

S-channel 1/0/1:10

<Sysname> display interface s-channel 1/0/1:10

S-Channel1/0/1:10 current state: UP

IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000c-29f9-366e

Summary of Contents for S5820V2 Series





























Search results

Summary of Contents for S5820V2 Series

Reviews:

Related manuals for S5820V2 Series

Brands by name

Popular brands

HP S5820V2 Series, Command Reference Manual

Search results

Summary of Contents for S5820V2 Series

Reviews:

Related manuals for S5820V2 Series

Brands by name

Popular brands