EN-30
Color
This sets the color of the
photo
that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Saturation
This sets the saturation of the
photo
that will be captured.
* High / Standard / Low
Metering
This sets the metering method for calculating the exposure.
Capture Md.
This sets the recording method at the time of capturing
photos
.
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* Center:
Averages the light metered from the entire frame, but gives greater
weight to the subject matter at the center.
* Spot:
A very small portion of the center of the screen is measured to
calculate the correct exposure.
* Average:
The exposure is measured all of the
subject
area.
* Single:
Captures one
photo
at a time.
* Continuous:
Permits continuous capture of up to 3
photo
s.
* AEB:
Permits 3 consecutive
photo
s in the order of standard exposure,
underexposure and overexposure compensation.
* Album Shot:
Creates an album-like layout to combine 3 shots into a single
image.
* Burst:
Permits continuous photography while pressing and holding the
shutter button. As long as you hold the shutter button pressed,
images are captured until the memory capacity is exhausted.
* Cont.flash:
Permits continuous capture of up to 3
photo
s with flash.
* Pre-shot:
Select a background by 1st shot, the image shown on display will
be transparent, then take the 2nd shot on the basis of 1st image.
Image of 1st shot is only a guiding tool, it won't be saved on SD
card. Normally this function is used when taking a portrait picture
and the background is selected by the model instead of the
photographer.
* Coupl.shot:
Uses separate areas to combine two shots. You can include
yourself in the
photo
.
* Burst 30fps:
Permits continuous capture of up to 30
photo
s in the resolution
640 x480 within 1 second.
* Interval capture: Captures continuous
photo
s at a preselected time interval.
