QuickSpecs
HPE ProLiant XL250a Gen9 Server
Configuration Information – Factory Integrated Models
Page 19
lower.
NOTE:
The processor model as well as the memory configuration determines the maximum speed
memory can operate. Please see the see the "Memory" section later in this document.
NOTE:
For the maximum supported memory speeds for each processor listed above, please reference
the 'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE:
DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
NOTE:
When v4 processors are selected, only PC4-2400T Memory Kits can be selected.
NOTE:
When v3 processors are selected, only PC4-2133P Memory Kits can be selected.
NOTE:
HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE:
All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the
E5-2603 v3/v4 and E5-2609 v3/v4.
NOTE:
Turbo indicates the maximum potential frequency when using Intel® Turbo Boost Technology.
The frequency boost increment is dependent on the processor SKU and the number of active cores.
In
general, a higher boost increment is obtained when fewer cores are active.
NOTE:
For the Intel® C610 Chipset E5-2600 v3/v4 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment
designation, 00 = Processor SKU, and x = L for low power SKUs.
HPE Memory
Registered DIMMs (RDIMMs) – DDR4-2400
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
836220-B21
HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
843311-B21
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
843313-B21
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
843315-B21
Load Reduced DIMMs (LRDIMMs) –DDR4-2400
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
805353-B21
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
805358-B21
HPE 128GB (1x128GB) Eight Rank x4 DDR4-2400 CAS-17-17-17 Load Registered Memory
Kit
809208-B21
Registered DIMMs (RDIMMs) – DDR4-2133
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
726718-B21
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
759934-B21
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
810744-B21
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
728629-B21
Load Reduced DIMMs (LRDIMMs) – DDR4-2133
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
726720-B21
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
726722-B21
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
726724-B21
NOTE:
Minimum 2 DIMMs are required; 1 DIMM per processor.
NOTE:
A maximum of 16 DIMMs are supported per XL230a server tray (or 8 DIMMs
max per processor).
NOTE:
LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a server.
NOTE:
HPE memory from previous generation servers (DDR3) is not compatible with
this server. HPE SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9. For
additional information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04355083.pdf
