HP Memory
NOTE:
Please choose memory options for the second processor of each node. Up to 6
DDR3 DIMM slots are dedicated per socket.
NOTE:
HP SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen8. For additional information,
please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_ca/14225_ca.html
NOTE:
HP certified SmartMemory must be used to guarantee full 1333MHz speeds.
NOTE:
Depending on the memory configuration and processor model, the memory
speed may run at 1600, 1333MHz or 1066MHz. Please see the Online Memory
Configuration Tool at:
www.hp.com/go/ddr3memory-configurator
.
Registered DIMMs (RDIMM) - For E5-2400 v2 Series Processors
NOTE:
The Following memory is supported by E5-2400 v2 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
713981-B21
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
731765-B21
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
713983-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
713985-B21
Registered DIMMs (RDIMM) - For E5-2400 Series Processors
NOTE:
The Following memory is supported by E5-2400 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
647893-B21
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
647897-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
647901-B21
HP Hard Drives
NOTE:
For the 1x60 model, choose up to a total of 60 LFF 3.5" hard drives from the
following options using any mix of SAS/SATA/SSD hard drives for desired performance
and up to a total of 2 SFF 2.5" hard drives from the following options for OS, boot or
additional storage purposes.
NOTE:
For the 2x25 model, choose up to a total of 25 LFF 3.5" hard drives per server
node from the following options using any mix of SAS/SATA/SSD hard drives for desired
performance and up to a total of 2 SFF 2.5" hard drives per server node from the
following options for OS, boot or additional storage purposes.
NOTE:
For the 3x15 model, choose up to a total of 15 LFF 3.5" hard drives per server
node from the following options using any mix of SAS/SATA/SSD hard drives for desired
performance and up to a total of 2 SFF 2.5" hard drives per server node from the
following options for OS, boot or additional storage purposes.
NOTE:
The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components for the subsystem.
NOTE:
Hard drives have either a one year or three year warranty.
QuickSpecs
HP ProLiant SL4540 Generation 8 (Gen8) Server
Core Options
DA - 14406 Canada — Version 19 — June 10, 2014
Page 23