HP ProLiant SL250s Gen8, User Manual

Page: 69 / 119

Hardware options installation 69
11.
Install the GPU cage.
12.
Install the interposer board (on page 19 ).
13.
Install the front GPU cage (on page 17 ).
14.
Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
15.
Connect all peripheral cables to the server.
16.
Power up the server.
Connecting the SUV cable
CAUTION: Before disconnecting the SUV cable from the connector, always squeeze the release
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Item Connector Description
1
SUV port SUV port on the server front panel
2
SUV connector For connecting to the SUV connector on the
server front panel
3
Video For connecting a video monitor
4
USB For connecting up to two USB devices
5
Serial For trained personnel to connect a null modem
serial cable and perform advanced diagnostic
procedures
Redundant hot-plug power supply option
CAUTION: All power supplies installed in the server must have the same output power capacity.
Verify that all power supplies have the same part number and label color. The system becomes
unstable and may shut down when it detects mismatched power supplies.