HP ProLiant SL210t Gen8 User Manual Download Page 16

Page: 16 / 103

Component identification 16

Drives in the second box correspond to node 3.

Hot-plug drive LED definitions

Item LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off

No drive activity

Do not remove

Solid white

Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is

erasing.

Flashing
amber/green

The drive is a member of one or more logical drives and predicts
the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

Summary of Contents for ProLiant SL210t Gen8








































































































Search results

Summary of Contents for ProLiant SL210t Gen8

Reviews:

Related manuals for ProLiant SL210t Gen8

Brands by name

Popular brands

HP ProLiant SL210t Gen8, User Manual

Search results

Summary of Contents for ProLiant SL210t Gen8

Reviews:

Related manuals for ProLiant SL210t Gen8

Brands by name

Popular brands