HP ProLiant SL170s - G6 Server, Maintenance And Service Manual

Page: 81 / 86

Physical and operating specifications 81
Table 13
Physical dimensions
Item Description
System board platform ATX (Advanced Technology Extended)
System board dimension 17.935’’x6.5’’
Dimensions (H x W x D)
(with bezel) 1.62 x 8.69 x 32.249 inch
Server weight (approximate) Full loading (all memory, hard drives, power supplies, and processors
installed) 83.97kg
Light loading (one piece of memory, one hard drive, and one processor
8 trays installed) 60.15kg
Table 14
Environmental specifications
Item Description
Thermal output (maximum operating) 1700 W/hr
System inlet temperature
Operating 50° to 95° F (10° to 35° C) at sea level with an altitude derating of
1.8°F per every 1000 ft (1.0°C per every 305 m) above sea level to a
maximum of 10,000 ft (3050 m), no direct sustained sunlight.
Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or
above 86°F (30°C).
System inlet temperature
Non-operating 40° to 140° F (-40° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Relative humidity (non-condensing)
Operating 10% to 85% relative humidity (Rh), 82.4°F (28°C) maximum wet bulb
temperature, non-condensing.
Relative humidity (non-condensing)
Non-operating 10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet
bulb temperature, non-condensing.
Altitude
Operating 10,000 ft (3050 m). This value may be limited by the type and number
of options installed. Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Altitude
Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Acoustic noise
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle LWAd 6.7 LpAm 50.0 dBA
Operating LWAd 7.0 LpAm 53.40 dBA