manualshive.com logo in svg

HP ProLiant series, Troubleshooting Manual, Page: 58 / 139

Share
Download
HP ProLiant series Troubleshooting Manual Download Page 58

 

Software tools and solutions  58 

Version control 

The VCRM and VCA are Web-enabled Insight Management Agents tools that HP SIM uses to facilitate 
software update tasks. 

•

 

VCRM manages the repository for Windows and Linux PSPs. Administrators can browse a graphical 
view of the PSPs or configure  VCRM to automatically update the repository with internet downloads 
of the latest software from HP. 

•

 

VCA compares software versions and updates. Administrators can configure VCA to point to a 
repository managed by VCRM. 

For more information about version control tools, refer to the 

HP Systems Insight Manager Help Guide

 

and the 

Version Control User Guide

 on the HP Systems Insight Manager website 

(

http://www.hp.com/go/hpsim

). 

 

Resource Paqs 

Resource Paqs are operating system-specific packages of tools, utilities, and information for HP servers 
running certain Microsoft® or Novell operating systems. The Resource Paqs include utilities to monitor 
performance, software drivers, customer support information, and white papers on the latest server 
integration information. Refer to the Enterprise Partnerships website 
(

http://h18000.www1.hp.com/partners

), select 

Microsoft

 or 

Novell

, depending on the operating 

system, and follow the link to the appropriate Resource Paq. 

 

ProLiant Support Packs 

PSPs represent operating system-specific bundles of ProLiant optimized drivers, utilities, and management 
agents. Refer to the PSP website 
(

http://h18000.www1.hp.com/products/servers/management/psp.html

). 

 

Operating system version support 

Refer to the operating system support matrix (

http://www.hp.com/go/supportos

). 

 

SoftPaqs 

SoftPaqs are software utilities (such as diagnostics and configuration utilities), software upgrades, 
ROMPaqs (firmware upgrades), and fixes that resolve software problems or provide workarounds. Refer 
to the Software and Drivers Download website (

http://h18007.www1.hp.com/support/files/server

). 

 

Change control and proactive notification 

HP offers Change Control and Proactive Notification to notify customers 30 to 60 days in advance of 
upcoming hardware and software changes on HP commercial products. 

For more information, refer to the HP website 
(

http://h18023.www1.hp.com/solutions/pcsolutions/pcn.html

). 

 

Care Pack 

HP Care Pack Services offer upgraded service levels to extend and expand standard product warranty 
with easy-to-buy, easy-to-use support packages that help you make the most of your server investments. 
Refer to the Care Pack website (

http://www.hp.com/hps/carepack/servers/cp_proliant.html

). 

 

Summary of Contents for ProLiant series












































































































































Reviews:

No comments