Setup 35
2.
Verify that the Ethernet network interface of the server is set to obtain an IP address automatically from
a DHCP server. Do the following:
a.
Click
Control Panel
→
Network and Sharing Center
.
b.
In the
View your active networks
section, click
Local Area Connection
.
c.
In the
Local Area Connection Statu
s window, click
Properties
.
d.
Select the
Internet Protocol Version 4
option, and then click
Properties
.
e.
To enable the DHCP server functionality, select the
Obtain IP address automatically
and
Obtain DNS
server address automatically
options.
Mount the router on the server
1.
Attach the self-adhesive rubber pads to the bottom surface of the router.
2.
Mount the router on the very top of a stack of servers and associated devices.
To achieve maximum wireless coverage, the PS110 must be placed on the very top of the stack of all
MicroServer devices. For example, if you are using an HP PS1810-8G Switch on top of the
MicroServer, the PS110 router must be placed on top of the switch.
Connect the server to the router
You can connect the server to the router through the following methods:
