HP ProLiant EC200a, User Manual, Page: 53 / 73

System battery replacement 53
d.
Install the communication board screws.
7.
Install the access panel (on page 19 ).
8.
If the server was removed from the cradle, wall mount, or storage expansion unit, do one of the
following:
o
Install the server in the cradle (on page 23 ).
o
Install the server in the wall mount (on page 32 ).
o
Install the server on the storage expansion unit (on page 35 ).
9.
Prepare the server for operation (on page 16 ).
Replace the system battery
1.
Locate the battery on the system board (" System board components " on page 9 ).
2.
Slightly push the metal tab, and then use the small flat-nose pliers to remove the system battery from
its socket.