NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE:
FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration
HP Models
HP ProLiant DL785 G5 Rack CTO Chassis
AH233A
Factory Integrated Models ship with:
Two embedded NC371i Multifunction Gigabit Network Adapters
HP Smart Array P400i Controller
HP Integrated Lights-Out 2 (iLO 2) management processor management
Six (6) Redundant Hot Plug Fans
Three Hot Plug Power Supply
Rack 7U Form Factor
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP Processors
AMD Opteron™ 8393 SE 3.1GHz Quad-Core Processor (105W ACP) 4P Option
Kit, FIO
NOTE:
If eight processors are desired, select one 535674-L21 and one 535674-
B21.
535674-L21
AMD Opteron™ 8389 2.9GHz Quad-Core Processor (75W ACP) 4P Option Kit,
FIO
NOTE:
If eight processors are desired, select one 535675-L21 and one 535675-
B21.
535675-L21
AMD Opteron™ 8387 2.8GHz Quad-Core Processor (75W ACP) 4P Option Kit,
FIO
NOTE:
If eight processors are desired, select one 535676-L21 and one 535676-
B21.
535676-L21
AMD Opteron™ 8381 HE 2.5 GHz Quad-Core Processor (55W ACP) 4P Option
Kit, FIO
NOTE:
If eight processors are desired, select one 535677-L21 and one 535677-
B21.
535677-L21
AMD Opteron™ 8378 2.4 GHz Quad-Core Processor (75W ACP) 4P Option Kit,
FIO
NOTE:
If eight processors are desired, select one 508201-L21 and one 508201-
B21.
508201-L21
QuickSpecs
HP ProLiant DL785 Generation 5
Configuration Information - Factory Integrated Models
DA - 13046 Worldwide QuickSpecs — Version 25 — 8/16/2010
Page 14
