HP ProLiant DL385 Generation 2, Quickspecs

Page: 30 / 40

NOTE: NOTE: NOTE: NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL385 G2 Base Models HP ProLiant DL385 G2 Base Models HP ProLiant DL385 G2 Base Models HP ProLiant DL385 G2 Base Models
Standard Memory Standard Memory Standard Memory Standard Memory
2 GB PC2-5300 DDR2 DIMMs (667 MHz) installed (2 x 1 GB)
Upgrading Memory and Memory Interleaving Upgrading Memory and Memory Interleaving Upgrading Memory and Memory Interleaving Upgrading Memory and Memory Interleaving
DIMMs must be installed in identical pairs. Bank interleaving is automatically enabled on a processor node under the following
conditions:
1) Four single ranked DIMMs populated per node (4 x 512 MB or 4 x 1 GB for example) yields 2-way bank interleaving.
2) Two dual ranked DIMMs populated per node (2 x 2 GB or 2 x 4 GB for example) yields 2-way bank interleaving.
3) Four dual ranked DIMMs populated per node (4 x 2 GB for example) yields 4-way bank interleaving.
If single and dual ranked DIMMs are mixed on the same node, bank interleaving will not be enabled.
Node interleaving can be configured via RBSU if both processors have the same memory footprint and it is independent of bank
interleaving.
DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the banks furthest away from each processor.
Standard Memory Plus Optional Memory Standard Memory Plus Optional Memory Standard Memory Plus Optional Memory Standard Memory Plus Optional Memory
Up to 26 GB memory is available with the standard memory of 1GB and the optional installation of PC2-5300 DDR2 DIMMs (667
MHz) memory kits. - 6 slots would be available, and potentially could be filled with 4GB DIMMs.
Standard Memory Replaced with Optional Memory Standard Memory Replaced with Optional Memory Standard Memory Replaced with Optional Memory Standard Memory Replaced with Optional Memory
Up to 32 GB of memory is available with the removal of the standard 1GB of memory and the optional installation of PC2-5300
DDR2 4 GB DIMMs (667 MHz) memory kits.
NOTE: NOTE: NOTE: NOTE: Chart does not represent all possible configurations.
NOTE:
NOTE: NOTE: NOTE: DIMM banks are active only when the corresponding processor socket is populated.
Memory Memory Memory Memory Slot Slot Slot Slot
1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7 7 8 8 8 8
Standard Standard Standard Standard 2 GB 2 GB 2 GB 2 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty Empty
Optional Optional Optional Optional 26 GB 26 GB 26 GB 26 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
Maximum Maximum Maximum Maximum 32 GB 32 GB 32 GB 32 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
Following are memory options available from HP:
1 GB PC2-5300 DDR2 2 x 512 MB Kit 408850-B21
2 GB PC2-5300 DDR2 2 x 1 GB Kit 408851-B21
4 GB PC2-5300 DDR2 2 x 2 GB Kit 408853-B21
8 GB REG PC2-5300 (2 x 4GB) dual rank 408854-B21
QuickSpecs
HP ProLiant DL385 Generation 2 (G2) HP ProLiant DL385 Generation 2 (G2) HP ProLiant DL385 Generation 2 (G2) HP ProLiant DL385 Generation 2 (G2)
Memory
DA - 12565 North America — Version 22 — July 25, 2007 Page 30