HP ProLiant DL380 G7, Maintenance And Service Manual

Page: 71 / 111

Removal and replacement procedures 71
5.
Remove the DIMM.
To replace the component, reverse the removal procedure.
For DIMM configuration information, see the server user guide.
Battery replacement
If the server no longer automatically displays the correct date and time, you may need to replace the battery
that provides power to the real-time clock.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
•
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
•
Replace only with the spare designated for this product.
To remove the component:
1.
Power down the server (on page 26 ).
2.
Extend or remove the server from the rack (" Remove the server from the rack " on page 28 , " Extend the
server from the rack " on page 27 ).
3.
Remove the access panel (" Access panel " on page 31 ).
4.
If any full-length expansion boards are installed, remove the full-length expansion board shipping
bracket ("
Full-length expansion board shipping bracket " on page 32 ).
5.
Remove the PCI riser cage (" PCI riser cage " on page 33 ).
6.
Remove the air baffle (" Air baffle " on page 32 ).