HP ProLiant DL320 Generation 5, User Manual

Page: 47 / 101

Hardware options installation 47
8.
Install the optional PCI riser board.
9.
Install the expansion board (on page 44 ).
10.
Install the PCI riser board assembly (on page 18 ).
IMPORTANT: The server does not power up if the PCI riser board assembly is not seated properly.
11.
Install the access panel.
12.
Install the server into the rack.
Storage controller option
IMPORTANT: For additional installation and configuration information, refer to the documentation that
ships with the option.
1.
Power down the server (on page 16 ).
2.
Remove the server from the rack (on page 17 ).
3.
Remove the access panel (on page 17 ).
4.
Remove the PCI riser board assembly (on page 18 ).
5.
Remove the fan assembly (on page 19 ).
6.
Remove the hard drive cables.
7.
Install the storage controller (" Expansion board " on page 44 ).
8.
Install the PCI riser board assembly (on page 18 ).
IMPORTANT: The server does not power up if the PCI riser board assembly is not seated properly.