HP ProLiant DL100 G2 DPSS, Administration Manual

Page: 28 / 155

Table 3 Front panel controls and indicators
LED
Color
Status
HDD
Green On = HDD install ready
Blinking = Data access
Off = No access
HDD
fault
Red
On = HDD failure
Power Green
On = Power on
Off = Power off
NIC Green
On (steady) = 10/100/1000 Mbps link
Blinking = 10/100/1000 MBps activity
Off = No LAN cable link
UID
Blue On (steady) = By server management software or UID switch to
indicate that service is needed
Blinking = By server management software to indicate under service
Off = By server management software
Rear view
Figure 3 shows components, controls, and indicators located at the rear of the DL100 G2.
10700
8 9
5 3 1 4 2 6 7
10
Figure 3 Rear panel components
1
Dual USB ports
6
Full-height, full-length PCI-X slot
2
PS/2 mouse port
7
AC power connector
3 NIC connectors (RJ45) (1–2) 8
PS/2 keyboard port
4 UID LED 9
Serial port
5
Low-pro fi le, half-length PCI-X slot
10 D-sub VGA port
28
Storage server speci fi cations and image con fi gurations