HP ProLiant BL685c G6, Maintenance And Service Manual

Page: 28 / 70

Removal and replacement procedures 28
To replace the component, reverse the removal procedure.
DIMM baffle
CAUTION: To avoid damage to the server blade and the enclosure, install all DIMM baffles in
the proper location after adding or replacing DIMMs. DIMM baffles that are missing or
installed incorrectly can compromise server blade and enclosure cooling.
To remove the component:
1.
Power down the server blade (on page 24 ).
2.
Remove the server blade (on page 24 ).
3.
Remove the access panel (" Access panel " on page 25 ).
4.
Remove the solid state drives, if installed (" Solid state drive " on page 27 ).
5.
Remove the DIMM baffle.
To replace the component, reverse the removal procedure.
DIMM
CAUTION: Use only HP DIMMs. DIMMs from other sources may adversely affect data
integrity.
To remove the component:
1.
Power down the server blade (on page 24 ).
2.
Remove the server blade (on page 24 ).
3.
Remove the access panel (" Access panel " on page 25 ).
4.
Remove the SSD drives, if installed (" Solid state drive " on page 27 ).
5.
Remove all DIMM baffles (" DIMM baffle " on page 28 ).